Connect the projector’s AC power cord into an AC outlet and
turn the Main On/Off switch on. The POWER indicator lights
red.
Press the POWER ON/STAND-BY button on the top control or
on the remote control.
The POWER indicator turns green and the cooling fans start to
operate. As the automatic slide shutter opens, a preparation
display appears on the screen and the countdown starts.
2
3
1
4
After the countdown, the input source that was selected the
last time appears on the screen.
Tu r ning On the Projector
Complete peripheral connections (with a computer, VCR,
etc.) before turning on the projector.
Selected Input Source
OFF ON
Main On/Off switch
18
Basic Operation
✔Notes:
• If the automatic slide shutter does not open properly, the projector will not be turned
on and the POWER indicator will blink orange. Press the POWER ON/STAND-BY
button again to restart.
• When “Countdown off” or “Off” is selected in the Display function, the countdown
will not be displayed on the screen (p.38).
• During the countdown period, all operations are invalid.
Top Control
Remote Control
POWER indicator
POWER
ON/STAND-BY
button
Automatic Slide Shutter
Do not touch the slide shutter while it is
moving, as this could cause injury or the
projector to malfunction.
Use this tab when handling manually.
