Assembly
Assembly
4
• Turn the frame on its side with the exposed end of the
straight axle up.
• Slide the other rear wheel (spoke side up) onto the end of
the straight axle.
• Place a cap nut on the end of the straight axle.
• Cover the cap nut with the assembly tool.
• Tap the assembly tool with a hammer. Gently pull the
rear wheel up to be sure the cap nut is securely
attached to the straight axle.
Cap Nut
Straight Axle
Rear Wheel
Spoke Side Up
• Fit two pedal hubs onto the pedal axle tabs. Make sure
the tabs fit into the slot in each pedal hub.
6
Pedal Axle
Tab
Slot
Pedal Hub
• While holding the pedal hubs on the pedal axle, insert the
pedal axle into the hole in the center of the front wheel.
• Push the pedal hubs into the center of the front wheel until
they are flush with the surface of the front wheel.
7
Pedal Hubs
Pedal Axle
Front Wheel Hole
• Fit the wheel cap into the center of the wheel. Tap the
wheel cap with a hammer to secure it to the wheel.
• Set the frame assembly aside.
5
Wheel Cap
5
5
Scrap Block
of Wood
Assembly Tool
• Turn the front wheel assembly over.
• Insert the remaining pedal hubs on top of and below
the pedal axle and into the hole in the center of the
front wheel.
•
Push the pedal hubs into the center of the front wheel until
they are flush with the surface of the front wheel.
8
Pedal Hub
Pedal Hub
B2488 RRR Trike Deluxe 4/17/03 2:07 PM Page 5
