A SERVICE OF

logo

3
System Configuration
AIS Transponder
FA-100
IF-1500AIS
12-24 VDC
NavNet2 Series
Radar, Plotter
Cable
MJ-A15A3F0013-035
Cable
MJ-A7SPF0003-050 (5 m)
Cable
MJ-A6SPF0012-050 (5 m)*
* 10 m cable optionally
available
Mounting
The unit can be mounted on a desktop or a bulkhead. When choosing a mounting location,
keep in mind the following points:
Consider cable lengths.
Choose a location away from rain and water splash and one which is not in direct
sunlight.
Observe the maintenance space noted in the outline drawing to facilitate servicing.
Observe the compass safe distances noted in the safety instructions at the beginning of
this manual.
Fix the unit to the mounting location with four self-tapping screws (4x16). Connect cables
referring to the interconnection diagram. Run a ground wire (local supply) between the
ground terminal and ship’s superstructure.