Fishnder 340C Owner’s Manual 3
usIng the fIshfInder 340c > understAndIng the MAIn PAges
Understanding the Main Pages
The Fishnder 340C typically offers several main pages for you to
use, including the Sonar Page, Flasher Page, and Numbers Page.
If you are using a dual frequency transducer, and you have the
Frequency set to , the following pages are available instead:
Split Sonar (200 kHz and 50 kHz), Sonar (200 kHz), Sonar (50
kHz), and Numbers.
To change the page:
1. Press PAGE. The Pages Menu appears.
2. Press PAGE or the ROCKER to select the page to which
youwanttogo.ThePagesMenudisappearsafterafew
seconds.
Depending on the current page, you can access page-specic
information, including one or more of the following:
• Access the Main Menu by pressing and holding the
key (see page 26).
• Access the Adjustment Menu by pressing and releasing the
key (see page 35).
• Access the advanced data conguration options by pressing
and holding the key (see page 37).
Using the Sonar Pages
The Sonar Page that you see and the options that appear in its
Adjustment Menu depend on the transducer and settings that you
are using.
If you are using a dual beam transducer, you can access the basic
Sonar Page and its related Adjustment Menu.
Water
depth at the
transducer
Depth
scale
Current
adjustment
option
Suspended
targets
Bottom
Mode
