![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/3/c7/3c78b641-9c4a-4800-9714-57aec5c66072/3c78b641-9c4a-4800-9714-57aec5c66072-bg19.png)
POSSIBLE CAUSN
PROBLEM
SNAGS, HOLES
TEARS, RIPS OR
EXCESSIVE WEAR
(continued)
~Small, unnoticed tears may enlarge during washing process.Check garments before
washing and mend all rips and tears.
@As Pel~nanentPress gaments age, t’heymay show fraying at collars and cuffs. This is
normal due to weakening of fibers by the Permanent Press process. It is not caused by
washer. Youcan slow this process by washing smallPermanent Press loads with a
Large WaterLevel. Do not wash heavy items such as towels with PermanentPress.
Remove collar stays, when possible.
~Roughness or burrs on agitatormay cause rips or tears. Check agitator and file rough
spots if necessary.
~May be caused by the use of Regular Cycles for delicate articles. Use Permanent Press
Cycle. Refer to Garment Manufacturer’s Care Labels,
oGarments weakened by age, sun or atmosphere. This is inevitable and is not caused
by washer.
~Too large loads, or too little water. Load washer only with number of items that will
move freely. Select correct water level.
HEAVILYSOILED
AREAS
suchas
collarsandcuffs
Pretreat with 1iquiddetergent. Use “Extra Cleaning” cycle, see Tips to Help You
Select Settings section.
@@
—
}VASHERWON’T
OPERATE
Make
surecordis pluggedintooutlet.
Make surebothhotandcoldfaucetsare turnedon.
~Make sure controls are set and Cycle Selector Knob is pulled out to ON position.
~Make sure lid is closed. Washer will fill but will not spin or agitate with lid open.
QCheckhousefusesor circuitbreakers.If anotherapplianceis sharingtheelectrical
outlet,removeit. WashershouIdhaveseparateoutlet.
$Make sure temperature selector switches are correctl}~set,
~
Makesurehotand coldfaucets are turned on and
.egula{edcorrectly.
@
,$-*-2$3.:%-
IMake sure hoses ayeconnected to correct faucets...
...,.,m.=>
..
.-;.:=-
IOt to hOt, COl~ tO cold,
i{
.--r-..
V&dtervalve
screensmay be stoppedLip.Removeiniet
Iosesfr(]n~Matervalve.Cleanthe screensand reinstallhoses.
Check
house wa[er heater to ]nal<esure it is deliveringwaterat 140°to 150°F.
14a1it2sure drain hose is not kinked.
f]
,:.’
~-,.J1
-—— .—___
—. —,,.,_________..
.———.
-”. ... . . ... .,,__ ”.._
—.