-10-
Model H8192 1" Belt/8" Disc Combo Sander
Inventory
The following is a description of the main
components shipped with your machine. Lay the
components out to inventory them.
Note:
If you can't find an item on this list, check
the mounting location on the machine or examine
the packaging materials carefully
. Occasionally
we pre-install certain components for shipping
purposes.
Inventory: (Figures
3–4) Qty
A. Motor and Base .......................................... 1
B. Belt Housing Assembly .............................. 1
C. Belt Table ................................................... 1
D. Sandpaper Disc 8" ..................................... 1
E. Aluminum Sanding Disc ............................. 1
F. Disc Table .................................................. 1
G. V-Belt Safety Cover .................................... 1
H. V-Belt Rear Cover ...................................... 1
I. Disc Dust Port 2" ........................................ 1
J. Table Lock Handles ................................... 2
K. Miter Gauge ................................................ 1
L. Hex Wrench 2.5mm ................................... 1
M. Hex Wrench 8mm ...................................... 1
N. Disc Dust Cover ......................................... 1
Hardware (not shown): Qty
• Disc Table Scale Pointer ............................ 1
• Cap Screws M10-1.5 x 20 .......................... 2
• Phillips Head Screw M6-1 x 15 .................. 1
• Phillips Head Screw M4-.7 x 40 ................. 1
• Phillips Head Screws M4-.7 x 10 ............... 6
• Set Screw M5-.8 x 5 ................................... 1
• Flat Washers 10mm ................................... 2
• Flat Washers 4mm ..................................... 5
• Lock Washers 10mm ................................. 2
• Wing Nut M4-.7 .......................................... 1
If any nonproprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
A
B
C
D
E
F
G
Figure 3. Model H8192 inventory items A–G.
H
I
J
K
L
M
N
Figure 4. Model H8192 inventory items H–N.
