13–2 Hardware and Software Guide
Setup Utility
Opening the Setup Utility
To open the Setup utility:
1. Turn on or restart the notebook in Windows.
2. Before Windows opens and while the “Press <F10> to enter
setup” prompt is displayed in the lower-left corner of the
screen, press
f10.
Changing the Language of the
Setup Utility
The following procedure explains how to change the language of
the Setup utility.
1. To open the Setup utility, turn on or restart the notebook in
Windows, and then press
f10 while the prompt, “Press <F10>
to enter setup,” is displayed in the lower-left corner of the
screen.
2. Use the arrow keys to select the Advanced menu.
3. Press
f5 or f6 (or use the arrow keys) to select a language, and
then press
enter.
4. When a confirmation prompt with your preference selected is
displayed, press
enter to save your preference.
5. To save your preferences and exit the Setup utility, press
f10
and then follow the instructions on the screen.
Your preferences are in effect when the notebook restarts in
Windows.
