A SERVICE OF

logo

i.
Top cover (see
Top cover on page 66)
j. System board (see
System board on page 86)
k.
Fan (see
Fan on page 91)
l. Heat sink (see
Heat sink on page 93)
Remove the processor:
1. Position the computer upside-down with the front toward you.
2. Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn
counterclockwise until you hear a click.
3. Lift the processor (2) straight up and remove it.
NOTE: The gold triangle (3) on the processor must be aligned with the triangle (4) embossed
on the processor slot when you install the processor.
Reverse this procedure to install the processor.
96 Chapter 4 Removal and replacement procedures