Use the Raster Compression feature to select the graphics compression method:
● Automatic. The software determines the best compression method to use.
● Best Quality. Forces the software to use a lossless compression method. (Lossless
means that no data is lost during compression.)
● Maximum Compression. Where applicable, requires the software to always use a
lossy compression method (some data is lost).
Graphics Mode
The Graphics Mode option is available only in the HP PCL 5c Unidriver. It is not available in the
HP PCL 6 and HP PS Emulation unidrivers.
Use the Graphics Mode feature to select one of the following settings:
● Send Graphics as Vector. Select this setting to send graphics to the product as a
combination of HP Graphics Language, version 2 (HP-GL/2) and raster images. This
setting might produce higher-quality output.
● Send Graphics as Raster. Select this setting to send all graphics to the product as images
composed of individual dots. This setting might improve printing speed in some cases.
Layout Options
The following Layout Options are available:
● Orientation
●
Page Order
Orientation
Orientation specifies how the document is positioned on the page. Portrait orients the print
vertically so that the printed image is taller than it is wide. Landscape orients the print
horizontally so that the printed image is wider than it is tall.
Page Order
Page Order specifies the order in which the pages of your document are printed. Front to Back
prints the document so that page 1 prints first. Back to Front prints the document so that page 1
prints last. The Back to Front setting is useful if you are printing to a face-up output bin to
achieve output in the correct order.
The page-ordering operation works on whole sheets of media rather than on individual logical
pages. Accordingly, if you set Pages per Sheet (on the Finishing tab) to be greater than one,
the ordering of logical pages on a physical sheet of media does not change.
Note
Note
158 Advanced tab features EN
