Installing the printer software
Before installing the printer software on a networked
computer, verify the following items:
● The printer is set up and powered on.
● The network hub, switch, or router is powered on and
functioning properly.
● All computers on the network are powered on and
connected to the network.
● The printer is installed on the network.
Previous installations
If the printer software was previously installed on the
computer, you must use the printer software CD to install an
Ethernet version of the printer driver on the computer. Follow
the steps below. The printer software installation wizard will
guide you through the installation process.
Caution: It is recommended that the printer and the
computers that use it be on the same subnet. Printer
installation across subnets can be problematic
depending on the type of router used.
