:: Seite 13 von 29 :: Datenblatt zum Produkt HP ProLiant DL140 (G3) / 1.60G DC mit DC# 128191 ::
Fragen zu dem Produkt HP ProLiant DL140 (G3) / 1.60G DC? Kein Problem - wir helfen Ihnen per eMail (info@diskontcomputer.com) gerne weiter!
http://www.diskontcomputer.com/Systeme/Server/HP_ProLiant_DL140_(G3)___1.60G_DC_DC_128191.html
NOTE:
For Configure to Order requirements within EMEA region, please consult local Sales Contact.
NOTE:
HP does not allow factory integration of options into standard models listed above.
Configure-to-order servers must start with a CTO Chassis.
NOTE:
This product offering does not support HP Factory Express Server Configuration Level 1.
NOTE:
FIO indicates that this option is a Factory Installable Option.
NOTE:
This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for additional information.
Step 1: Base Configuration (choose one of the following configurable models)
Non-Hot Plug Model
HP ProLiant DL140 G3 Non- Hot Plug SATA Rack CTO Chassis (North America)
409023-B21
Factory Integrated Model ships with:
Two integrated Broadcom 10/100/1000 NICs (Wake on LAN and PXE capable)
Two available PCI-Express slots:
Slot 1: full-length/full-height PCI-Express x16
Slot 2: low-profile/half-height PCI-Express x8
(
NOTE:
Optional PCI-X option kit includes: Slot 1: full-length/full-height PCI-X
100; Slot 2: low-profile/half-height PCI-X 100. PCI-X slots are 64 bits; 133 MHz
capable if only one PCI-X card is installed in the server
)
HP Embedded SATA RAID Controller
650 Watt Power Supply
One Highline IEC Power Cord
6 Non-Hot Plug Fans
Rack (1U), (1.75 in / 4.45 cm)
HP ProLiant DL140 G3 Hot Plug SAS/SATA Rack CTO Chassis (North America)
409024-B21
Factory Integrated Model ships with:
Two integrated Broadcom 10/100/1000 NICs (Wake on LAN and PXE capable)
One available PCI-Express slot:
Slot 1: full-length/full-height PCI-Express x16
Slot 2: low-profile/half-height PCI-X slot populated by the SAS/SATA
storage controller
(
NOTE:
Optional PCI-X option kit includes: Slot 1: full-length/full-height PCI-X
100; and Slot 2: low-profile/half-height PCI-X 100. PCI-X slots are 64 bits; 133
MHz capable if only one PCI-X card is installed in the server
)
One HP SAS/SATA Host Cable Kit
One Hot Plug Backplane Option Kit
650 Watt Power Supply
One Highline IEC Power Cord
6 Non-Hot Plug Fans
Rack (1U), (1.75 in / 4.45 cm)
QuickSpecs
HP ProLiant DL140 Generation 3 (G3)
Configuration Information - Factory Integrated Models (North America only)
DA - 12509 Worldwide — Version 14 — July 9, 2007
Page 13
