24
HP Pavilion home PC
Filename: sa3rwqs.doc Title: HP-Print2k.dot
Template: HP-Print2K.dot Author: JimL Last Saved By: kimt
Revision #: 164 Page: 24 of 122 Printed: 10/17/02 03:42 PM
To configure multi-channel audio output
for the DVD player:
Note:
WinDVD is set up for two (stereo) speaker output.
In order to hear all speakers on multi-channel DVD
movies, change the audio properties for WinDVD
so that they match your speakers configuration
(set in the previous procedure) and the recorded
DVD capability.
1 Insert a DVD or start InterVideo WinDVD. (See
“Playing a DVD” on page 59.)
2 Right-click anywhere in the WinDVD video
window, and then click Properties.
3 Click the Audio tab.
4 Click the option for the number of speakers
that matches your multi-channel speaker
system.
5 Click OK.
Note:
If you want to play a stereo DVD, repeat
these steps (1 through 5) and change the
audio properties for WinDVD to match the
DVD output.
To use the microphone with
multi-channel audio:
The multi-channel speaker system connects to
the PC using the Microphone, Audio (Line) In,
and Audio (Line) Out connectors on the back
of the PC.
Your computer may have another microphone
connector in the front of the PC under the access
door. If present, this microphone connector is
ready to use.
To use the back microphone connector, you
must disconnect your multi-channel speakers
system and select 2 channel audio setup.
To change the audio configuration, see
“To configure multi-channel audio output
for speakers configuration” on page 23.
