219
12 Commands
Command Shell Overview
The LineJet Print Server comes with an in-depth command shell which allows
you to manipulate objects like destinations, I/O ports, and models.
Additionally, it provides you with monitoring and troubleshooting capabilities.
Access Methods
There are many ways this command shell can be accessed:
• built-in HTML forms
• a Telnet session from a TCP/IP host to the LineJet Print Server
• a single remote shell command (i.e., rsh, rcmd, remsh) from a TCP/IP
host
Main Command Shell Prefixes
All configurable commands start with either store or set. Troubleshooting
commands usually start with
debug, and view commands start with list.
If the
store prefix is used, the LineJet Print Server must be repowered for
the changes to take effect. Since
store affects flash memory settings only,
the print server must reset and read the new settings now in flash memory.
If the
set prefix is used, a save command must also be executed so that the
new settings are retained after power cycles. Since
set only affects the
settings in memory, they will be lost after a power cycle unless they are saved
to flash memory.
Getting Command Help
The LineJet Print Server command shell provides several online help tools.
These include the following:
? Command
Typing ? when logged in to the command shell will produce a full listing of all
commands available.
