Staple
49
6
❒ Staple printing will be cancelled under the following conditions:
• If the number of staple jobs exceeds maximum. For information about the
maximum number, see “Specification”, General Settings Guide.
• If a paper size that cannot be stapled is selected. For information about pa-
per sizes that can be stapled, see “Specification”, General Settings Guide.
• If a paper type that cannot be stapled is selected.
The paper types that can be stapled are plain and recycled. Labels, thick
paper and OHP transparencies cannot be stapled.
• If positions other than those fixed for stapling are specified.
• If there are inconsistencies between the duplex folding direction and the
staple position during duplex printing.
• If paper sizes are mixed when a different paper size is specified during a
print job.
• When staples have run out.
• When feeding paper from the bypass tray.
• When staples have run out and when Auto Continue has been set, printing
will continue without stapling after the message has been displayed.
❒ When using the optional booklet finisher to staple 2 at Center, the print job
will be cancelled if the staples run out.
❒ Paper sizes that can be stapled when using the Mixed Size mode are as fol-
lows:
• A3 L and A4 K
• B4 L and B5 K
• 11" × 17"L and 8 1 /2" × 11"K
