2 How to Install and Replace Components In Your Desktop PC
Upgrading the Main Memory
54
Upgrading the Main Memory
NOTE Use only HP memory modules provided for your PC model. The use of
other memory modules is not supported. For information about
supported HP accessories, connect to the web site
www.hp.com/go/vectraaccessories.
You can install up to a total of 512 MB (two 256 MB modules). Main
memory is available in 100 MHz modules of 32 MB, 64 MB, 128 or
256 MB. (Although the 256 MB memory modules are ECC, the ECC
feature is not used by this PC.)
1
Remove the PC’s cover (described in this chapter).
2
Line up the two side notches correctly and insert the new memory
module. (You can use either slot.)
3
Replace the cover (described in this chapter).
Location of Main Memory
(modules can be installed in
either slot)
