15
WATER LEVEL button
ᖛ̤ྈ⸹
POWER switch
ヅ〦
The selected indicator for
processes lights.
ⴆỄ᱿྆ḻᥨ㔄ˌȯ
With each pressing on
the PROGRAM button,
the indicator for
processes will light in
sequence.
ᕓྈɺʁȵỄȶྈ⸹྆ḻ
ᥨሳͩᓝ㔄ˌȯ
PROGRAM indicator
Ễㆴḻ
AUTO SELF CLEAN
indicator will light when the
AUTO SELF CLEAN
function has been set.
⥑⇦ᣅ⎊ՒᾉᛤᘺԼ⋱ᆹŊ
⎊Ւᾉᛤᘺ྆ḻᥨ㔄ˌȯ
AUTO SELF CLEAN indicator
⎊Ւᾉᛤᘺㆴḻ
WATER LEVEL
Ą
REMAINING time
Ą
PRESET time indicator
ᖛ̤ŌԘㇷᆹ⿵Ōㅷዮᆹ⿵ㆴḻ
The remaining time will indicate at the
end of operation.
আ⳥ⱧരㆴḻԘㇷ᱿ᆹ⿵ȯ
ĄThe displayed remaining time will
automatically correct according to the
actual operation status.
ㆴḻ᱿Ԙㇷᆹ⿵ሳྈᤫ૪も⳥⠗ᨊᗼ⎊
ՒΔᔌȯ
CLEAN button
ᛤះྈ⸹
41
41
24Ɯ25
Used to set required water level or change
setting.
߱ྈᤫ⎊నト⣬⥑હᖛ̤ሩᄊ⥑હ᱿ҙૌᆹ͐ᮢ
ȯ
Ą
After the washing machine starting, please press
"PAUSE" button temporarily.
আ⳥ⱧരॖトሩᄊŊ⦼҅ྈʁȵᇺϟȶྈ⸹ȯ
ĄPress and hold "WATER LEVEL" button to
replenish water during the course of washing or
rinsing.
(No water will be replenished after reaching the
top water level of each process.)
ᘺ⠥ᗢᘺ⳧Ễʑบ⡵ᖛŊ⦼ྈՒȵᖛ̤ȶ
ྈ⸹ȯྈ̦ᖛ̤ྈ⸹ᆹⳖ⠗⡵ᖛȯ
(Ⳮӷ׳Ễ᱿ሱ㋧ᖛ̤ര͵ʃҪⳖᖛȯ)
14
14
16
16
Used for power switch.
ᮢᅠ〦ヅȯ
ĄAutomatic power OFF
Buzzer beeps and the power of unit will be
switched off automatically at the end of operation.
The washing machine will be automatically
switched off after 5 minutes of no start operation
when power on.
ヅ⎊Ւ〦Լ⋱
⳥ⱧታരŊᘺ⠥ᑨᱹӛ✙㏦⊖ʏ⎊Ւӡᅜヅȯ
ⳇヅരŊʃ Ւᘺ⠥ᑨŊ૽Ңᄍ⇦5Ӡ⾝രʬ
ሳ⎊Ւ〦ヅȯ
10 minutes before operation stops, the buzzer
will beep.
⳥Ⱨϟᔋ10Ӡ⾝Ԋሳᱹӛϟᔋㅷبȯ
PROGRAM button
Ễྈ⸹
There are ten options available, you can
choose the right one based on the types
and dirty levels of the washing.
ዾჇᘺ⠥ُᖸ㋢᱿ỄಙŊרഺ
10
Ớʃ
᱿ỄⳖ⠗ⴆႹȯ
ĄThe selected indicator for processes
lights.
ⴆỄ᱿྆ḻᥨ㔄ˌȯ
Ą"NORMAL", "HEAVY",
"FAVOUR" process is with memory
function, and last selected program
will be displayed after power on.
ȵᐻȶȮȵԻȶȮȵΤː⥑હȶ
Ễሷ⥆ຣԼ⋱Ŋⳇヅര૽ㆴ
ḻʀɺᓝ᱿ⴆ᱿Ễȯ
Set the TUB CLEAN and
TUB DRY.
߱⥑⇦ᾉᛤᘺדᾉㆺʯᆹ͐
ᮢȯ
Set the AUTO SELF CLEAN.
߱⥑⇦⎊Ւᾉᛤᘺᆹ͐ᮢȯ
24Ɯ25
AUTO SELF CLEAN button
⎊Ւᾉᛤᘺྈ⸹
ᯛ㌂⌉ᖛ᱿⤟ぜᅞᘍ Cancellation for loosening & spinning
• This machine has been set with loosening & spinning process before delivering from factory.
ᮟٴӛೇԊŊ⥑હ॑ᯛ㌂⌉ᖛỄȯ
1 Switch on the power supply.
ⳇヅ ȯ
2 Press "PROGRAM" button for 3 seconds.
ྈ̦ȵỄȶྈ⸹ 3ấ⾝ȯ
3 After buzzer sounds "Hoola", loosening & spinning will
be cancelled.
✙㏦ݽᱹӛơܶ-Ƣ᱿ɺ⊖Ŋᯛ㌂⌉ᖛ֯⡕⤟ぜȯ
Canceling the loosening & spinning
ᯛ㌂⌉ᖛ⤟ぜ
Setting the loosening & spinning
ᯛ㌂⌉ᖛ⥑હ
Ʃ If the above settings have been executed, during the last phase for spinning, the "Loosening process" will not
be executed.
To set the loosening & spinning process, please repeat the above procedures.
Ʃ Ⳗ⠗ʀⲩ⥑હŊԅ߱⌉ᖛ᱿ሱべᕀŊʃࡠ⠗⠥᱿ơᯛ㌂ỄƢȯ
⣬⥑હᯛ㌂⌉ᖛỄᆹŊ⦼⸅एʀⲩ⥑હȯņᯍ✙㏦ݽᱹӛơܶ- Ƣ᱿ɺ⊖Ŋ⠧ḻ⥑હȯŇ
About loosening & spinning (In the last phase of spinning, execute the "Loosening process", so that the laundry can be easily taken out.)
〦ᅠᯛ㌂⌉ᖛņ߱⌉ᖛ᱿ሱべᕀŊࡠ⠗⠥᱿ơᯛ㌂ỄƢ ƢŊ˫͵⠥ሩૌᆞחӛŇ
