HotBrick VPN Client User Manual Property of HotBrick — 2005
14
4.4.1 Settings description
Once the parameters are set, click on “Save & Apply” to save and to take into account the new configuration.
4.4.2 Advanced configuration ("Advanced" Button)
Name
Label for Authentication phase used only the configuration user interface. This
value is never used during IKE negotiation. It is possible to change this name at
any time and read it in the tree control. Two Phase 1 can not have the same
name.
Interface
IP address of the network interface of the computer, through which VPN con-
nection is established. If the IP address may change (when it is received dy-
namically by an ISP), select "*".
Remote Gateway
IP address or DNS address of the remote gateway (in our example: gate-
way.mydomain.com). This field is mandatory.
Pre-shared key
Password or key shared with the remote gateway.
Certificate
X509 certificate used by the VPN client (see certificate configuration).
IKE encryption
Encryption algorithm used during Authentication phase (3DES, AES ...).
IKE authentication
Authentication algorithm used during Authentication phase (MD5, SHA ...).
IKE key group
Diffie-Hellman key length.
