A SERVICE OF

logo

Open as PDF
next previous
3
1. Place the foam panel on the bottom of the box.
2. Place the chair base into the box.
3. Place the foam spacer on top of the chair base (Fig.3).
4. Hold the backrest face-up, aligning the bottom of the backrest on top of the front of the chair base and the power panel on the back of the backrest
with the square insert in the foam spacer.
5. Gently lower the backrest onto the chair base, guiding the power panel and remote control into the square insert in the foam spacer.
6.
I
nsert a cardboard and foam corner spacer on each side of the headrest
(Fig.4).
7
. Insert a cardboard corner spacer on each side of the bottom of the backrest
(Fig.4).
PACKAGE THE CHAIR
(Fig.
3
)
Backrest
F
oam spacer
Chair base
(Fig.
4
)
C
ardboard corner spacer
C
ardboard and foam corner
C
ardboard and foam backrest spacer