Human Touch PC-075/085/095 Manual

next previous

INSTALLING THE NEW FOOTREST ROD

1. Remove the screw from the top of the black plastic spacer barrel (Fig.3).

2. Align the spacer barrel with the corresponding hole on the bracket, then secure it using the screw

you removed in the previous step and the 4 mm (5/32") Allen Key (Fig.4).

3. From below the chair frame, insert the metal rod through the corresponding hole in the chair

frame then into the black spacer barrel (Fig.4).

4. Turn the metal rod clockwise by hand to secure it, then tighten it using a 10-mm wrench.

(Fig.3)

(Fig.4)

Spacer barrel

Footrest rod

Screw

Bracket

Please send any questions or comments regarding these instructions to: documentation@humantouch.com

™

, LLC.