28 – English
TECHNICAL DATA
Note 1: The power rating of the engine indicated is the average net output (at specified rpm) of a typical production engine for the
engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ from this value. Actual power
output for the engine installed on the final machine will depend on the operating speed, environmental conditions and other values.
R 120S
Dimensions
Length with cutting unit, cm/ft 229 / 90.08
Width with cutting unit, cm/ft 126,3 / 49.7
Height, cm/ft 108 / 42.7
Operating weight with cutting deck, kg/lb 225 / 496
Wheel base, cm/ft 84 / 33.07
Tyre dimensions 165/60-8
Air pressure, rear - front, kPa / bar / PSI 60 / 06 / 8.7
Max. gradient 10°
Motor
Brand / Model Briggs & Stratton / 4195
Nominal engine output, kW (see note 1) 11
Displacement, cm
3
/cu.in 500 / 30.5
Max.motor speed, r/min 3300 ± 100
Fuel, minimum octane grade lead-free 87
Fuel tank capacity, US pint/litre 7 / 14.8
Oil, class SJ-CF SAE 5W/30 or SAE 10W/30
Oil tank capacity, US pint/litre 1,4 / 2.96
Starting Electric starter
Electrical system
Type 12 V, negative earthed
Battery 12 V, 20 Ah
Spark plug EMS PLATINUM
Electrode gap, mm/inch 0,75/0,030
Main fuse Flat pin, 15 A.
Transmission
Brand Tuff torq T36N
Forward speed, km/h. 0-9 / 0-5,6
Reverse speed, km/h 0-9 / 0-5,6
Cutting unit
Type SD 42
Cutting width, cm/inch 107 / 42
Cutting heights, 5 positions, mm/inch 25-100 / 1-4
Blade length, mm/inch 430/17
IMPORTANT INFORMATION When the service life of this product has been served and it is no longer used it should be returned
to the dealer or to an applicable station for recycling.
IMPORTANT INFORMATION We reserve the right to change specifications and designs without prior notice so as to implement
improvements. Note that no legal claims are valid on the basis of information in this manual. Use only genuine parts for repairs.
The warranty is not valid if non genuine parts are used.
