1. LOOSEN TERMINALS
2. INSERT BARE END;
TV Size Selector
ᕤ
This control optimizes the performance of the Intermezzo 3.5c
based on the size of the TV on which it is placed.
If you are placing the Intermezzo 3.5c behind a perforated
screen for a projection TV, set this switch to “None.”
If you are placing the Intermezzo 3.5c on top of a TV with a
diagonal screen size up to about 36," set this switch to “Small.”
If you are placing the Intermezzo 3.5c on top of a TV with a
diagonal screen size larger than 36," set this switch to “Large.”
High-Pass Filter
ᕥ
When set to “On,”this control limits the low frequencies that the
Intermezzo 3.5c will reproduce and allows you to use your
processor’s/receiver’s bass-management settings for an ideal
blend with a subwoofer.
When set to “Off,”the Intermezzo 3.5c will reproduce the entire
frequency range. Use this setting only if your system does not
include a subwoofer.
LED Selector
ᕦ
This switch determines whether the green power indicator on
the woofer level control
ᕧ
will illuminate when the speaker is
playing.The setting of this switch does not affect the
performance of the speaker in any way.
Setting the Woofer Level Control
ᕧ
1. Set the processor’s/receiver’s center-channel-speaker setting
to “Small.”
2. Confirm correct setting of Set TV Size selector
ᕤ
.
3. Using the test tones in your receiver/processor, adjust the
center-channel-speaker output (on the processor) to match the
left and right speakers.
4. Finally,fine-tune the level adjustment on the Intermezzo 3.5c
ᕧ
to most closely match the tonal balance of the main left and
right speakers. (For the Intermezzo 4.1t, initially set the center-
channel level to “5.”For the Intermezzo 2.6, set to the same
setting as the Intermezzo 2.6’s woofer adjustment.)
Speaker Connections
ᕣ
