DLP Projector – User’s Manual
Starting and Shutting down the Projector
1.
Connect the power cord to the pro-
jector. Connect the other end to a
wall outlet.
The
POWER LED will be on.
2.
Turn on the connected devices.
3.
Ensure the POWER LED dis-
plays a solid green. Then press the
Power ON button on the projector
keypad or remote (
).
The projector splash screen displays
and connected devices are de-
tected.
If more than one input device is connected, press the SOURCE button and use ▲▼ to
scroll among devices.
4.
• VGA : Analog RGB
• HDMI 1/2: High Definition Multimedia Interface
•
S-Video: Super video (Y/C separated)
•
Video: Traditional composite video
5.
To turn the projector off, press the
Power OFF button (
). on the
projector keypad or remote.
When
the POWER OFF window appears,
press
the Power OFF button ( )
again.
The projector turns off.
Caution:
Do not unplug the power cord until the LAMP LED stops flashing–indicating the projector has
cooled down.
– 9 –
