5
Insignia 32" LCD TV/Blu-ray Combo, 1080p
www.insigniaproducts.com
Installing the stand or
wall-mount bracket
Installing the stand
To install the stand:
1 Remove the stand from the box and place it on a
table or bench.
2 Secure the stand to the stand column with the
provided four screws and washers.
3 Place your TV/Blu-ray combo face down on
table, aligning the bottom of your TV/Blu-ray
combo with the edge of the table. Place a towel
or similar material between the screen and the
table to protect the screen.
4 Slide the stand column into the slot in the
bottom of the TV/Blu-ray combo.
5 Secure the stand column with the eight
provided screws.
6 Secure the stand cover (included) to the
TV/Blu-ray combo with the two screws
provided.
7 Place your TV/Blu-ray combo in an upright
position on a flat surface.
Tips
• Unplug the AC cord from the AC INPUT jack.
• Before beginning this process, make sure that
you lay your TV/Blu-ray combo on a clean, safe,
and cushioned surface to avoid any damage to
your TV/Blu-ray combo.
• Do not touch or press the TV screen. The glass
might break under pressure.
Stand screws with
washers (M4 * 8)
Stand column
Stand
Note
To remove the stand, reverse these steps.
Stand screws
(M4 * 12)
Screws (ST3 * 8)
Stand cover
