A SERVICE OF

logo

25
®
Door Sensor
Model: 2845-222
®
Door Sensor
Model: 2845-222
®
Door Sensor
Model: 2845-222
Software-Only Features
Enable Group 1 & 2 Broadcast Disable Local Programming
Disable LED and Beeper Adjust Heartbeat Interval
When enabled, Door Sensor will send a
separate On for opening and for closing.
Useful if you want a device to turn on when
the door closes, like a bathroom fan.
Prevents changing any settings using the set
button or tap-and-hold programming.
The status LED will not blink when the
sensor is triggered and the beeper will not
respond to button presses.
Customize the duration of time between
sensor check-ins; by default, the sensor will
broadcast it’s state once every 24 hours.
X
Group 1 ON Group 2 ON