![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/9/0d/90dcefb9-6151-41ab-8d11-7875ce28daa3/90dcefb9-6151-41ab-8d11-7875ce28daa3-bga.png)
SECTION 4—INSPECTION AND COMPRESSOR INTERFACE
HomeFill
™
10 Part No 1148114
SECTION 4—INSPECTION AND
COMPRESSOR INTERFACE
NOTE: Refer to the HomeFill
™
Compressor Owner’s Manual for
compressor operating instructions.
Cylinder Prefill Inspection
ƽ WARNING
All cylinders MUST be inspected before attempting to fill;
otherwise, injury or damage may occur.
NEVER smoke in an area where oxygen is being
administered.
NEVER use near any type of flame or flammable/explosive
substances, vapors or atmosphere.
NOTE: For this procedure, refer to FIGURE 4.1 on page 12.
The Hydrostatic Testing Date
Aluminum cylinders MUST undergo testing every five years.
ƽ WARNING
DO NOT fill cylinders that have not been tested in the
past five years. Otherwise, serious personal injury may
result. Contact your dealer for replacement.