advanced features 67
Guide Program Numbers
Guide Program Numbers are used by the VIDEO Plus+ system to identify the correct preset
to record. You should only need to perform this function if:
• using a PlusCode number does not identify a preset number automatically
• you add a channel after Auto Setup or Preset Download has been performed
• you wish to use the VIDEO Plus+ system to record a satellite programme
Manually Setting Guide Program Numbers
get to the guide prog set screen Press m. Move the highlight bar to INITIAL SET using
the A and B buttons and press
OK
3
/
(or E). Move the highlight bar to GUIDE PROG
SET
using the A and B buttons and press
(or E).
enter guide prog number Use the A and B buttons to enter the correct Guide
Program number for the TV station shown then press
(or E).
enter receiving preset number Press AUX (number key
‘0’) to select
TV PROG or SAT. Use the A and B buttons
to enter the receiving preset number that the VCR or satellite
receiver uses to receive the TV station then press
OK
3
/
(or E).
satellite receiver users To timer-record a satellite
programme with the VIDEO Plus+ system, you need to install
the provided Satellite Controller and perform the procedure
described in
Satellite Receiver Control Setting (੬ pg. 45).
return to normal screen Press m.
[1] a k [0]: SAT
[MENU]: EXIT
GUIDE PROG SET
GUIDE PROG TV PROG
CH4
F
44
HR-S7955EK-EN/p66-75 4/18/02, 06:17 PM67
