27
VIDEO ADJUST Screen
Item Function
Variable Factory
range setting
IRIS LEVEL
COLOUR
LEVEL
ENHANCE
LEVEL
AGC MODE
SUPER
AGC
BLC
Adjusts the brightness level of the video signal.
• To lower the brightness level …Decrease the
value
• To raise the brightness level … Increase the
value
To adjust the color level of the video signal.
• To make colors lighter … Decrease the value
• To make colors darker … Increase the value
To adjust the contour enhancing level of the
video signal.
• To make the picture quality softer …
Decrease the value
• To make the picture quality harder …
Increase the value
Sets the maximum gain of the AGC (Automatic
Gain Control).
• Set to OFF when the AGC function is not
used.
• Set to 20 dB when illumination is particularly
dim.
Used when the brightness is still insufficient
even if the AGC MODE is set at 20 dB.
ON: Gain level is increased.
OFF: Gain level is not increased.
* When SUPER AGC is ON;
• Dark areas of the screen may appear grainy.
• Gain will be set according to the setting of
the SUPER AGC with no relation to the AGC
MODE setting.
Sets the backlight compensation function. Set
when a bright light source, etc. is placed in the
same direction as the subject.
• OFF: The backlight compensation function
does not work.
• AREA 1 to AREA 4: When the SET button is
pressed, the fixed light metering areas are
displayed. Select one of the four types.
• EDIT 1 to EDIT 2: When the SET button is
pressed, the user light metering areas are
displayed. Select one of the two types.
੬ See “BLC Adjustment” on page 32.
–5 to
NORMAL
to 5
–5 to
NORMAL
to 5
–5 to
NORMAL
to 5
OFF
10 dB
20 dB
ON
OFF
OFF
AREA 1
AREA 2
AREA 3
AREA 4
EDIT 1
EDIT 2
NORMAL
NORMAL
NORMAL
20 dB
OFF
OFF
