. SCREWS
FIG. 58
. REMOVE SHUNT
PLUG IN
-CONDENSATE
PUMP
FIG. 5C
FOR THE ELECTRICIAN
ELECTRICAL REQUIREMENTS
A 115 Volt, 60 Hz, AC only, 15 Amp fused electrical supply is
required (time delay fuse or circuit breaker is recommended).
It is recommended that a separate circuit, serving only this
appliance, be provided. DO NOT use an extension cord.
ELECTRICAL GROUND IS REOUIRED ON THIS
APPLIANCE.
RECOMMENDED
GROUNDING MtrnOD
DO NOT, UNDER ANY CIRCUMSTANCES, REMOVE
THE POWER SUPPLY CORD GROUND PRONG.
For your personal safety, this appliance must be grounded.
This appliance is equipped with a power supply cord having a
3-prong grounding plug. To minimize possible shock hazard,
the cord must be plugged into a mating 3.prong grounding
type wall receptacle, grounded in accordance with the National
Electrical Code and local codes and ordrnances. If a mating
wall receptacle is not available, it is the personal responsibility
and obligation of the customer to have a properly grounded
3-prong wall receptacle installed by a qualified electrician.
See Figure 6.
3.PRONG
GROUNDING TYPE
WALL RECEPTACLE
GROUNDING
POWER SUPPLY
FIGURE 6
ALTERNATE
GROUNDING MtrnOD
DO NOT, UNDER ANY CIRCUMSTANCES, REMOVE
THE POWER SUPPLY CORD GROUND PRONG.
If changing and properly grounding the wall recepta-
cle
IS
impossible and where local codes permit
