www.kodak.com/go/aiosupport 70
KODAK HERO 2.2 All-in-One Printer
Scanning to a memory card
1. Insert the memory card into the memory card slot on the printer.
2. Press .
3. Press to select Scan, then press
OK.
4. Press to select Scan to Memory Card, then press OK.
5. Press to select an option, then press or to change the setting.
6. Press . The scanned file appears on the memory card.
Scan Option Settings Description
Scan What Photo
(default)
Sets the scan settings for scanning a picture
(see Changing the scan settings for scanning
from the printer control panel, page 65).
Document
Sets the scan settings for scanning a document
(see Changing the scan settings for scanning
from the printer control panel, page 65).
File Type JPG (default) The scanned file is saved as a JPG.
Single-page PDF The scanned file is saved as a single-page PDF.
Multi-page PDF The scanned file is saved as a multiple-page
PDF.
Scan Size Auto (default)
2 x 3
3.5 x 5
4 x 6
4 x 7
4 x 8
5 x 7
4 x 12
8 x 10
8.5 x 11
A4
Determines the size that is scanned.
Save as
Defaults
No / Yes To save the settings as the new default, press
OK. With Ye s selected, press OK.
