59
bizhub 180 Control Panel
1 Error Indicator
Flashes when an error has occurred.
2 Printer Key/Indicator
Lights up while data is being printed
from the computer and flashes while
data is being sent. For details, refer
to the Printer Controller User Manual.
3 Status Key
Used to view the counters.
4 Utility Key
Used to enter Utility mode and display
the first Utility mode screen.
•MACHINE SETTING, PAPER SOURCE
SETUP, USER MANAGEMENT, ADMIN.
MANAGEMENT, COPY SETTING 1 & 2
5 Display
Displays setting menus, error messages,
and specified settings such as the number
of copies and the zoom ratio.
6 No Key
Erases the entered numbers and letters.
Returns to the previous screen.
7 Yes Key
Confirms the current setting.
8 Auto Paper/Auto Size Key
Used to select between the Auto Paper
or the Auto Size function.
9 Zoom Key, and Keys
•Used to select a preset enlargement
or reduction ratio.
•With each press, a zoom ratio between
x 0.25 and x 4.00 is selected in 0.01
increments.
•Used to specify the selection above
or below in setting screens and menus.
10 Paper Key
Used to select the size of the paper
to be printed on.
11 Auto/Photo Key, and Keys
•Used to specify the scanning density
of copies.
•Used to specify the selection at the left
or right in setting screens.
12 Erase Key
Used to select the area of the document
that is erased.
13 File Margin Key
Press to select the “File Margin” function.
14 Finishing Key
Used to select a copy “Finishing” function.
15 X/Y Zoom Key
Used to specify different scaling proportions
for the vertical and horizontal directions.
16 Neg. Pos. Key
Press to make copies with the dark- and
light-colored areas of the document inverted.
17 Copy Key
Used to select between the “2-in-1”
and the “4-in-1” copy functions.
18 Copy Program Key
• Copy programs can be stored.
•Stored copy programs can be selected
and recalled.
19 Book Separation Key
Used to select the “Book Separation”
function.
20 Original Key
Used to select between the “Duplex Orig.”
function and the “Mixed Orig.” function.
21 Scan Key
Press to enter Scan mode. The indicator
lights up in green to indicate that the machine
is in Scan mode.
(Available only when the Network Card
NC-502 and the Scanner Unit SU-502
are installed. Both scan kits require
the respective fax kits installed).
22 Fax Key
Does not function on this machine.
23 Copy Key
Press to enter Copy mode. The indicator
lights up in green to indicate that the machine
is in Copy mode.
24 Access Key
Used with user management.
25 Energy Saver Key
Press to enter Energy Save mode.
26 Interrupt Key
Press to enter Interrupt mode. The indicator
lights up in green to indicate that the machine
is in Interrupt mode.
Press again to cancel Interrupt mode and
return to the mode before Interrupt mode
was entered.
27 123/ABC Key
Does not function on this machine.
28 Panel Reset Key
•Cancels all copy functions and returns
them to their default settings.
• Deletes all queued jobs.
29 Stop Key
Stops the multi-page copy operation.
30 Start Key
• Starts copying.
•Queues a copy job if pressed while
the machine is warming up.
•The indicator lights up in green to indicate
that the machine is ready to start copying,
or it lights up in orange to indicate that the
machine is not ready to start copying.
31 10-Key Pad
• Used to specify the number of copies.
• Used to enter setting values.
•The [
*
] and [
#
] keys do not function
on this machine.
