17
GETTING STARTED RIGHT AWAY
RECORDING
Turn the Control dial to REC
or .
1
Press the Program-reset button.
• This puts the camera in full-auto
mode.
2
Frame the image in the
viewfinder.
• Place the focus frame on your subject.
3
Press the shutter-release button
partway down.
• Autofocus will activate and will glow
in the viewfinder if focus is confirmed
and locked.
4
Press the shutter release button
all-the-way down to take the pic-
ture.
• The busy lamp and the frame counter
in the data panel will blink while the
recorded image is being written to
memory.
• In , the camera will display the
image in the LCD monitor. In REC,
press the Quick View button to see a
brief display of the image.
5
