29
Irregularity Possible cause Remedies
Focus dots do not appear.
A diopter compensation lens is
inserted.
Adjust the focus using the retinal image since
focus dots do not appear when a diopter com-
pensation lens is in use.
The ash lamp turns on but a black
image or partially chipped image is
obtained.
The shutter speed of digital
camera is not set to 1/25 sec.
Set the shutter speed of digital camera to 1/25 sec.
The flash lamp does not turn ON
and no image is captured.
The digital camera is not set to
manual mode.
Set the digital camera to manual mode.
Trigger cable is not fully insert-
ed.
Fully insert the trigger cable to the end.
Although image are successfully
captured and shown on the LCD
monitor of the digital camera, the
monitor of the PC presents no im-
age.
The USB cable is not fully in-
serted.
Fully insert the USB cable to the end.
Images are captured without flash
lamp turned on.
The synchronous cable is not
fully inserted.
Fully insert the synchronous cable to the end.
8 Troubleshooting
k
Refer to
“12 Technical information”
.
k
Refer to
“12 Technical information”
.
