11 Protocol 3000
By default, the VS-88HN is set to Protocol 2000 (see Section 10) but is also
compatible with Kramer’s protocol 3000.
Note that the VS-88HN needs to be set to protocol 2000 in order to
use the IR remote control.
The VS-88HN can be operated using serial commands from a PC, remote
controller or touch screen using the Kramer Protocol 3000.
This section describes:
Kramer Protocol 3000 syntax (see Section 11.1)
Kramer Protocol 3000 commands (see Section 11.2)
11.1 Kramer Protocol 3000 Syntax
11.1.1 Host Message Format
11.1.1.1 Simple Command
Command string with only one command without addressing:
Command SP Parameter_1,Parameter_2,…
11.1.1.2 Command String
Formal syntax with commands concatenation and addressing:
Command_1 Parameter1_1,Parameter1_2,…|
Command_2 Parameter2_1,Parameter2_2,…|
Command_3 Parameter3_1,Parameter3_2,…|…
11.1.2 Device Message Format
