Setup Steps
Note: Please follow the setup steps in the order
they are given to ensure that the volume mounts
correctly on your computer.
1. Connect the power supply to a
grounded surge protector or wall outlet
and to your LaCie Hard Disk.
2. Connect the Hi-Speed USB 2.0 cable
to your computer and to the drive.
3. The drive will power on and mount in
My Computer (Windows) or on your
desktop (Mac) when steps 1 and 2 are
complete*. The detailed User Manual
and LaCie Storage Utilities are pre-
loaded on the drive. We strongly advise
that you read and copy the detailed
User Manual onto your computer. If the
detailed User Manual and Utilities are
not accessible on the drive, they can be
downloaded from www.lacie.com.
For the latest documentation and software updates, please go to:
http://www.lacie.com/us/support/documents/index.htm?id=10007
*The LaCie Hard Disk is formatted in FAT 32. If you would like to use a different fi le format, you will
need to reformat the hard drive. The FAT 32 fi le format allows you to access data on any operating
system (Windows or Mac), and is ideal for cross-platform use. The NTFS format for Windows users will
allow you to store fi les larger than 4GB, to format partitions larger than 32GB or to optimize perfor-
mance under Windows 2000/XP/Vista. To optimize performance, Mac users should format in HFS+.
Refer to the User Manual for more details.
