51
TAPE IN: Dual phono, line level input sockets, ideal for connecting an
external tape machine, CD player, etc. to the amplifier.
TAPE OUT:Dual phono, line level output sockets, ideal for connecting an
external recording device.
FX RETURN: Stereo socket for output of external effects processing devices
connected to FX send.
FX SEND: Socket for connecting external effects devices. The level of each
individual channel signal present at this socket is determined by the
individual channels FX level setting. Line level signal.
FX Level: Controls the overall effects level on the on board DSP. The level of
effects for each individual channel is determined by the individual channels
FX level setting.
DSP PROGRAM SELECTOR: Selects the desired program from the on
board DSP.
BANK SELECT: Selects the type of on board DSP effect.
PHANTOM POWER LED: 48V phantom power, provided for condenser mics.
and active DI boxes. It is globally switched to all of the mic. inputs, when the
switch is set to ‘48V’. It is vital to ensure that phantom power is switched ‘Off’
when using passive mics., DI boxes, etc., in the mic. inputs, otherwise the
source may be damaged. All connections should be made before switching
phantom power on. Switch located on rear panel.
POWER SWITCH: Powers up the unit.
Concept
53
50
54
56
52
57
58
55
13
CD640 CD850S Manual
