5: Commands and Levels
Does not flush serial data upon closing a tunneling con-
nection.
Flushes serial data buffer when a tunneling connection is
closed.
flush stop character disable
Forwards the stop character from the Line to the network.
flush stop character enable
Prevents the stop character from the Line from being for-
warded to the network.
Does not watch the modem control pin to disconnect.
Watches the modem control pin and disconnects if it is not
asserted.
Removes the stop character.
Disables disconnect after timeout feature for tunneling
sessions.
Displays the current configuration.
Displays the last 20 commands entered during the current
CLI session.
The character may be input as text, control, decimal, or
hex.
A control character has the form <control>C.
A decimal value character has the form \99.
A hex value character has the form 0xFF.
Disconnects when no data has been received on the line
(serial port) for the
specified length of time.
<milliseconds> = timeout in milliseconds.
Stores the current configuration in permanent memory.
discovery (config-discovery) level commands
Zeros Query Port counters
Returns to the config level.
Unzeros Query Port counters
Displays the current configuration.
Displays the last 20 commands entered during the current
CLI session.
Displays statistics and information about the discovery
services.
Disables the Query Port server.
Enables the Query Port server.
Stores the current configuration in permanent memory.
Exits to the enable level.
Disables IPv6 DNS record precedence.
Enables IPv6 DNS record precedence.
Return a lookup on the DNS name or IP address.
Displays the current configuration.
Displays the last 20 commands entered during the current
XPort® Pro Lx6 Embedded Device Server Command Reference 48
