16
Channel search
Press / for manual search. Press and hold / for auto-search.
Press to open the pull-down menu. Here you can set the following:
Search by hand
•
Use this function to search the channels by hand as explain above
(channel search). Enter this mode by pressing search by hand and >.
Auto search
•
Use this function to make a completely automatic channel search. The
found channels will automatically added to the preset list. Enter this mode
by pressing auto search and >.
Preset mode
•
When this mode is active you can’t search new channels but only flip
between the preset channels by pressing / buttons. Enter this mode
by pressing preset mode and >.
Save channel
•
Use this function to save a channel. Search with “channel search” the
preferred channel. Open the pull-down menu and select save channel,
press > and select the preferred channel number to save.
Delete channel
•
Use this function to delete a saved channel. Open the pull-down menu
and select delete channel, press > and select the preferred channel
number you wish to delete.
Stereo switch
•
Use this function to switch between mono/stereo mode. When mono is
selected the player will only output sound at one side of the earphone.
Open the pull-down menu and select stereo switch, press > and select the
preferred mode you wish to use.
Receive area
•
Use this function to receive the correct band with for the region where you
are located. Open the pull-down menu and select receive area, press >
and select the correct area.
FM Record
•
Use this function to record the current the radio broadcasting. Open the
pull-down menu and select FM record, press >. Now the record menu will
be opened. For operation instructions refer to chapter Record mode.
