Using Photo and the Photo Card Mode menu
Make sure you have inserted a memory card or flash drive into the printer.
1 From the control panel, press
or repeatedly until Photo is highlighted.
2 Press to view a quick slideshow of the photos on your memory card.
Press for more photo options.
The Photo Card Mode menu appears.
3 From the Photo Card Mode menu, you can:
• Press
or to enter any of the submenus in this menu.
• Press
or repeatedly to scroll through the submenus or menu items until you reach the one you want to
change.
• Press
or repeatedly to reach the value you want or to move through each photo shown on the control
panel.
• Press to select a photo when the control panel instructions indicate this is possible.
Control panel instructions also indicate when you can press to edit a photo, view it full screen, change print
settings, or see a print preview.
• To go into other submenus, menu items, and values to make additional changes, continue to use the navigation
buttons (
, , , and ).
• Press repeatedly to return to the previous menu, if needed.
4 Press to start printing the photo job.
The following table explains the function of submenus, menu items, and values in the Photo Card Mode menu.
Menu item How to
View Slideshow
Press to start a slideshow of all the photos on the card. You can select how fast you
want to see each photo displayed on the control panel.
Values are:
• Fast (3 Seconds/Image) which means each image or photo appears for three
seconds.
• Moderate (5 Seconds/Image)
• Slow (10 Seconds/Image)
Browse and Print Photos
Press to browse and print the photos on the card.
• Press or repeatedly to scroll to the photo you want.
• Press to select an individual photo.
• Press
or to set the number of copies you want to print.
• Press to enter the Photo Menu to make changes that affect the appearance or
printing of the photo. When you finish changing settings, press .
45
