ENGLISH
11
INSTALLATION
Removing/Assembling the
Refrigerator Door Handles
Removing the Handles
1
Loosen the set screws with a
3
/
32
in. Allen wrench and
remove the handle.
2
Loosen the mounting fasteners that connect to the
refrigerator door and handle using a 1/4 in. Allen wrench,
remove the mounting fasteners.
Assembling the Handles
1
Assemble the mounting fasteners at both ends of the
handle using a
1
/
4
in. Allen wrench.
2
Place the handle on the door by fitting the handle foot-
prints over the mounting fasteners and tightening the set
screws
with a
3
/
32
in. Allen wrench.
Removing/Assembling the
Freezer Drawer Handle
NOTE
Removing the doors is always recommended when it
is necessary to move the refrigerator through a nar-
row opening. If it is necessary to remove the handles,
follow the directions below.
Removing the Handles
1
Loosen the set screws located on the lower side of
the handle with a
1
/
8
in. Allen wrench and remove the
handle.
2
Loosen the mounting fasteners that connect to the
freezer drawer and handle using a
1
/
4
in. Allen wrench,
and remove the mounting fasteners.
Assembling the Handles
1
Assemble the mounting fasteners at both ends of the
handle using a
1
/
4
in. Allen wrench.
2
Place the handle on the door by fitting the handle foot-
prints over the mounting fasteners and tightening the set
screws
with a
1
/
8
in. Allen wrench.
1_MFL62184416_Eng.indd 111_MFL62184416_Eng.indd 11 2011.4.21 10:5:47 AM2011.4.21 10:5:47 AM
