Safety
system
Make sure
all
safety systems are in working
order before operation. The tool must not
operate if only the trigger
is
pulled or if
only the safety lever
is
pressed against the
wood.
It
must work only when both actions
are performed. Test for possible faulty
operation with
a
tool unloaded and pointed
well away from yourself or any bystanders.
NOTE
:
There
is
a
possibility that the tool may operate for an instant when only the trigger
is
pulled. This
does
not indicate
a
problem.
If
this occurs, point the tool well away from
yourself or any bystanders.
Release
and pull the trigger again to make sure the safety
systems are in working order.
Loading
staples
CAUTION:
Always remove the battery cartridge before loading the staples into the
tool.
Press the
plate
spring on the rear of the
backward.
sub-magazine and slide the sub-magazine
Plate
spring
Load staples into the main magazine with
staple ends facing up
as
illustrated
at
right.
8
