6
Pincushion distortion <=2mm
High voltage regulation H<=4mm, V<=4mm(0-25FL)
Low radiation* MPR-I specification
Front controls Power, Brightness, Contrast, Horizontal-Size, Hori-
zontal-Position, Vertical-Size, Vertical-Position,
Pincushion
Power saving
Display Power Management Signaling (DPMS)
SUSPEND mode 25W (Max.)
OFF mode 5W (Max.)
Input voltage 100~240VAC, 50/60 Hz
Power consumption 85W maximum
Operating Temperature 0°~40°C
Environment Humidity 20~90%
Altitude 0~10,000ft.
Connector 15 Pin D-Sub
Dimensions 14.02 W x 14.02 H x 15.91 D
*Low radiation monitors only.
Specifications subject to change without notice.
Appendix B - Video Cable Pinout
Figure D - Pin
Layout and Pin
Assignment
Chart
PIN SIGNAL PIN SIGNAL
1 Red 9 No Pin
2 Green 10 Digital Ground
3 Blue 11 Monitor Sense 1
(Jumper to Pin
10)
4 Monitor Sense 1
(Jumper to Pin 10)
12 No Pin
5 Monitor Sense 1
(Jumper to Pin 10)
13 Hor. Synch.
6 Red Return 14 Vert. Synch
7 Green Return 15 No Pin
6
1
5
10
11
15
