A SERVICE OF

logo

3
COM1 COM2 LPT1 VIDEO
Expansion boards
signal is re-enabled the monitor returns to normal operation.
The monitor enters DPMS OFF mode when the computer turns off both the
Horizontal and Vertical Synchronization signals. This mode reduces the
monitor’s power consumption to 3W. When the synchronization signals
are re-enabled the monitor returns to normal operation.
Section 2 - Installation
2.1 Attaching the Base
Carefully place the monitor
on its side or top.
Insert the hooks on the swivel
base into the slots in the
bottom of the monitor. Push
down and forward on the
base until the it snaps into
place.
Place the display upright in
an appropriate location.
2.2 Connecting the Cable
Figure 2-1 Connecting the Base
Figure 2-2 Monitor Connections