10
BLADES
Check the blade mounting bolts at frequent
intervals for proper tightness.
To check blades, fold top handle down and tilt
mower backward and view blades under deck from
the front. (see pic) do not place mower on its side!
Check the blade condition frequently, particularly if
the mower has hit a foreign object or is vibrating.
Sub-standard cutting and catching will result from a
neglected blade. Your Authorised Dealer can
replace blades as necessary, or if you prefer, supply
the parts for you to do yourself.
BLADE CHANGE
1. Disconnect the spark plug wire.
2. Adjust the mower to the high cut position.
3. Lift the rear ap and prop open to give full
access to the blades.
4. Remove the blades, blade retaining bolts, nuts
and washers and discard.
5. Fit the new blades, blade bolts, washers and
nuts in set sequence, refer drawing below (to
loosen rotate anti-clockwise, to tighten rotate
clockwise).
Blade bolt torque : 14.8-22.0 ft-lb (20-30 N•m)
CAUTION
Always use genuine original equipment parts
to ensure safety and proper performance.
Substitute parts can be disappointing and
dangerous.
AU
16
Check the blade mounting bolts at frequent
intervals for proper tightness.
To check blades, fold top handle down and tilt
mower backward and view blades under deck from
the front. (see pic) do not place mower on its side!
Check the blade condition frequently, particularly if
the mower has hit a foreign object or is vibrating.
Sub-standard cutting and catching will result from a
neglected blade. Your Authorised Dealer can replace
blades as necessary, or if you prefer, supply the parts
for you to do yourself.
BLADE CHANGE
1. Disconnect the spark plug wire.
2. Adjust the mower to the high cut position.
3.
to the blades, use only Talon blade kit number
5223722-01.
4. Remove the blades, blade retaining bolts, nuts and
washers and discard.
5. Fit the new blades, blade bolts, washers and nuts
in set sequence, refer drawing below (to loosen
rotate anti-clockwise, to tighten rotate clockwise).
Blade bolt torque : 14.8-22.0 ft-lb (20-30 N•m)
BLADES
CAUTION
Always use genuine original equipment parts
to ensure safety and proper performance.
Substitute parts can be disappointing and
dangerous.
MAINTENANCE INFORMATION
