A SERVICE OF

logo

339Exterior lamps
Technical
data
Instruments
and controls
Operation Driving
Instrument
cluster display
Practical hints Car care Index
Taillamp assemblies
1 Securing screw
2 Lens
3 Bulb for turn signal lamp
PY 21W 12V
4 Bulb for tail lamp,
R5W12V
5 Stop lamp
P21W12V
Unscrew securing screws (1) and remove lens (2).
Push bulb into socket, turn counterclockwise and
remove.
Insert new bulb in socket, push in and turn clockwise
until it clicks in.
Install lens (2) and screw in securing screws (1).
Do not overtighten the securing screws, as this could
cause the lens to break.
J_G463.book Seite 339 Mittwoch, 19. September 2001 8:06 08