335
Practical hints
Replacing bulbs
Parking and standing lamp bulb
̈ Switch off the lights.
̈ Open the hood (୴ page 263).
̈ Press the tab on cover 2 and remove
cover.
̈ Pull out the bulb socket 5 with the
bulb.
̈ Pull the bulb out of the bulb socket.
̈ Insert a new bulb in the socket.
̈ Reinstall the bulb socket.
̈ Press cover 2 onto the housing until
the tab engages.
Side marker lamp bulb
̈ Switch off the lights.
̈ Carefully slide lamp towards rear.
̈ Remove front end first.
̈ Twist bulb socket counterclockwise
and pull out.
̈ Pull bulb out of the bulb socket.
̈ Insert new bulb in socket.
̈ Reinstall bulb socket, push in and twist
clockwise.
̈ To reinstall lamp, set rear end in
bumper and let front end snap into
place.
