![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/e/5f/e5fc71ae-916a-4bb9-a17f-e28849fbdc55/e5fc71ae-916a-4bb9-a17f-e28849fbdc55-bg115.png)
276
Operation
Engine compartment
̈ Use the tab to pull cap 1 upwards.
̈ Refill the reservoir with MB Windshield
Washer Concentrate “MB SummerFit”
and water (or commercially available
premixed windshield washer
solvent/antifreeze, depending on
ambient temperatures).
̈ Press cap 1 on the filler neck until it
has completely engaged.
For more information on filling up the
washer reservoir, see “Windshield/rear
window washer system and headlamp
cleaning system” (
୴ page 430).
!
Always use washer solvent/antifreeze
where temperatures may fall below freezing
point. Failure to do so could result in damage to
the washer system/reservoir.
!
Only use washer fluid which is suitable for
plastic lenses. Improper washer fluid can
damage the plastic lenses of the headlamps.