1 - 11 - 1
1 - 11 - 1
1 - 1
MANUAL No. 99MBH001B
1 INTRODUCTION
11
11
1
INTRODUCTIONINTRODUCTION
INTRODUCTIONINTRODUCTION
INTRODUCTION
1.1 Preface1.1 Preface
1.1 Preface1.1 Preface
1.1 Preface
The Mitutoyo Digi-Derm is a coating thickness gage of non-destructive
type with a digital display. If it is connected to the Digimatic Mini-
processor, measurements can be printed and processed. Read this op-
eration manual carefully before use.
1.2 Application1.2 Application
1.2 Application1.2 Application
1.2 Application
1) No.179-741, 179-745 & 179-7461) No.179-741, 179-745 & 179-746
1) No.179-741, 179-745 & 179-7461) No.179-741, 179-745 & 179-746
1) No.179-741, 179-745 & 179-746
Capable of measuring the thickness of the following types of non-
magnetic plating, films, etc. applied to magnetic materials (Iron,
Nickel, Cobalt, etc.):
• Plating: Gold, Copper, Zinc, Tin, Chromium, Lead, Cadmium, etc.
• Paint: Oil-based paint, Lacquer, Synthetic resin, Metallic-coating,
Rubber paint, etc.
• Lining: Resin, Rubber, Tar, Glass, etc.
• Parkerizing, Metal spraying, Oxide film, and other special film
• Film:Metal, Resin, Rubber, Paper or any other non-magnetic film
can be measured using steel base metal as the reference.
2) No.179-755 & 179-7562) No.179-755 & 179-756
2) No.179-755 & 179-7562) No.179-755 & 179-756
2) No.179-755 & 179-756
Capable of measuring the thickness of the following types of non-
conductive plating, films, etc. applied to non-magnetic materials
(Brass, Copper, Aluminum, etc.):
• Paint: Oil-based paint, Lacquer, Synthetic resin, Rubber paint, etc.
• Lining: Resin, Rubber, Tar, Glass, etc.
• Oxide film, and other special film
• Film: Resin, Rubber, Paper or any other non-conductive film can
be measured using Copper, Brass, or Aluminum base metal as the
reference.
