A SERVICE OF

logo

PAGE 14 — GA9.7HE 60 HZ GENERATOR• OPERATION AND PARTS MANUAL — REV. #1 (04/29/10)
INSTALLATION
CONNECTING THE GROUND
The nut and ground terminal on the generator should always
be used to connect the generator to a suitable ground. The
ground cable should be #8 size wire minimum.
At the generator, connect the terminal of the ground cable
between the lock washer and the nut (Figure 2) and tighten
the nut fully. Connect the other end of the ground cable to
a suitable earth ground (ground rod).
GROUND ROD
FOR EARTH
GROUND
GENERATOR
GROUND LUG
CONNECT TO
BUILDING
GROUND
IF REQUIRED
8 FT. MINIMUM
REFERENCE
NEC 250-52(C)
GROUND
CABLE
#8 MINIMUM
240
V
120
ON
OFF
ON
OFF
GA-9.7HE
ACCIRCUIT
BREAKER
(formain)
15A
30A
30A
120V
240V
120/240V
START
BUTTON
OPERATION
SWITCH
IDLECONTROL
SWITCH
for120V
for120V
20A
for240V
for120/240V
ACCIRCUITBREAKER
ACVOLTMETER
9700
OFF OFF
35A
35A
Figure 2. Generator Grounding