then it will show:
Note: If you know that this subaddress does not have a password, skip to
step 7.
6
Use the numeric keypad to enter the appropriate password.
In this example, we enter 654321.
7
Press
ENTER
. The
LCD
shows briefly:
then it will show:
8
Enter the fax number either by pressing a one-touch key, entering a speed-
dial number or dialing from the numeric keypad.
Do not press
START
.
9
What you do now depends upon when you want the transmission to begin.
• To have it begin now, skip to step 12.
• To delay it, proceed to step 10.
10
Press
COM
-
OPTIONS
,
COM
-
OPTIONS
,
ENTER
. The
LCD
shows:
11
Use the numeric keypad to enter the day and time when the transmission
should begin, then press
ENTER
.
12
Press
START
.
If you chose an immediate transmission in step 9, your fax machine will begin
dialing. If you chose a delayed command, the machine will display
“
**
Reserved
**
” on the
LCD
, indicating that the machine has stored the
command in memory and will perform it later.
Note: The
ITU
-
T
subaddress and password can be up to 20 characters in length and
can include any combination of numbers and the
*
and # symbols. Do not
include other non-numerical characters.
Note: To change a number you have already entered:
— Press to move the cursor to the left or to move it to the right, to
that character.
— Press
CANCEL
to erase the character.
— Enter the digit(s) you want.
F
-code polling
Polling with
ITU
-
T
subaddress / password:
1
Press
COM
-
OPTIONS
six times.
2
Press
ENTER
. The
LCD
shows briefly:
then it will show:
3
Use the numeric keypad to enter the appropriate subaddress.
In this example, we enter 123456:
4
Press
ENTER
. The
LCD
shows briefly:
then it will show:
5
Use the numeric keypad to enter the appropriate password number.
In this example, we enter 654321.
Note: If you know that this sub-address does not have a password, skip to
step 6.
654321_
_
Enter Password
123456_
_
Enter SubAddress
6.F-Code Polling
Time: 15/17:05
_
Enter Fax Number
654321_
_
Enter Password
Beyond the basics
2.26
