NetComm NB6PLUS4W Manual

next previous

ADSL2+ Router

Mac User Guide

NB6Plus4W – 5

7. Click on the “Show” pop-up menu and select “Built in Ethernet”. Click on the TCP/

IP tab.The TCP/IP settings will be displayed. Click on the “Conﬁgure” pop-up menu

(“Conﬁgure iPV4” if you’re using Mac OS 10.3) and select “Using DHCP”. Click on

Apply Now to save the changes.

Your dialog box should now look like this:

8. If your Mac does not accept an IP address from the DHCP server in your

NB6Plus4W and the IP address ﬁeld remains blank, try selecting “Using DHCP with

manual address” from the “Conﬁgure” popup menu (“Conﬁgure iPV4” if you’re using

Mac OS 10.3) and entering 192.168.1.3 in the “IP address” ﬁeld.

9. Click on the “Show” pop-up menu and select “Network Status”. Check to see that

the bullet alongside “Built-in Ethernet” is green.

Mac

Set-up

(cont)